This is a smaller version of the acclaimed TFV4 Tank. The Mini is identical in every way except that it has a 22mm diameter that arguably looks better on a wider range of mods, and has a slightly smaller 3.5mL capacity. It even uses all the same coils you love!
The Taste Furious V4 Tank from Smok produces more vapor than any other tank out there. It holds 3.5mL of liquid and is made out of stainless steel and glass. There are multiple coil options available for all types of vapers, mods, and wattage ranges.
This is a top-filling tank, so you can refill without removing the tank from your mod!. To fill, swivel the top cap out to the side and fill with liquid through the slot. Filling the tank is very quick and easy.
Replace the coil periodically by unscrewing the base, then unscrewing the coil from the base. Replace the coil, then reattach the base to the rest of the tank.
The drip tip is dual-layer to keep temperatures low and reduce juice backup. It’s a wide-bore stainless steel drip tip that allows maximum airflow. By turning the ring, you can adjust airflow on the mouthpiece to cool down your vapor.
The TFV4 Mini has a 22mm diameter that will look great on most box mods, as well as 22mm mechanical mods. The 3.5mL capacity means you don’t have to fill up as often, but filling from the top is very convenient and fast.
This is a tank for the power user. Massive clouds, incredible flavor, top-filling, a 3.5mL capacity, and endless coil choices make this one of the best subohm tanks on the market!
- 1 x Smok TFV4 Mini Tank
- 1 x 0.35Ω TF-CLP2 Core Dual Clapton Coil Replacement Head
- 1 x 0.40Ω TF-S6 Sextuple Coil Replacement Head
- 1 x TF-RCA Single-Coil Clapton RBA Head
- 1 x Replacement Glass
- 1 x Black Seal Gasket A
- 1 x Black Seal Gasket B
- 2 x Replacement Seal Gaskets for Top Cap
- 1 x Small Airflow Tip
- 1 x White Smok Band
- 1 x Black Smok Band
- 2 x Replacement O-Rings for Drip Tip
- 1 x Screwdriver Tool
- 1 x Refill Warning Card
- 1 x Replacement Silicone Filling Plug
- 1 x Pack of Pre-Cut Organic Cotton Wick
- 1 x Replacement Seal Ring for Glass Tank Tube
- 1 x Replacement Wire
100% PURE ORGANIC COTTON
EXPLORE FRESH AND NEW FLAVORS WITH EIGHT NEW PATENTED COIL HEADS
All coils use organic cotton as wicking material, which can produce a purer taste.
SPECIAL CLAPTON CORE
More advanced TF-CLP2, Clapton Dual Coil Head has more surface area in contact with the wick to give off more vapor.
TEMP SENSING COILS
New patented TF-N2 Coil & TF-Ti Coil are using Nickel 200 and Titanium temperature sensing wire respectively, and perfectly for work with the SMOK X CUBE II temperature-control mod.
SEPERATE CHAMBER DESIGN
All coil heads use the Separate Chamber Design, which can significantly improve the stability and reduce the interference with each other coil.
DEFAULT: DOUBLE LAYERED STRUCTURE
The default drip tip with double-layered structure has been improved on the inner layer of glass to avoid scalding.
TFV4 MINI DRIP TIP
ANOTHER CHOICE: PYREX TUBE INSIDE
The another choice drip tip, which the inner tube is made of Pyrex Glass and the outer tube is Stainless Steel, is also with double-layered structure. It’s a perfect combination of durability and scald-proof protection.
4 PAIRS OF AIR SLOTS
BRING YOU AN EXTREMELY OPEN DRAW
Airflow can be adjusted freely by either turning the ring on the drip tip or the one at the base of atomizer.
TOP REFILL DESIGN
MAKES FILLING AS EASY AS IT GETS
Leak proof e-liquid slot can significantly solve leaking problem.
HOW TO FILL WITH E-LIQUID
- Hold the tank with one hand, and use another one to press top cap and move it counterclockwise.
- Add e-liquid through the slot, and pay attention not to drip it into the central airflow tube.
- Close the cap carefully and firmly. Then let it stand for several minutes to get the organic cotton completely saturated.
HOW TO BUILD THE RBA
- Before starting make sure your hands are clean.
- Taking TF-RCA core apart.
TF-RCA comes with two build screws on each side, one side is the plus terminal of the deck and the other is minus terminal. This provides more possibility for you to install your coil exactly and comfortably.
- The kit includes a small airflow tip that can be placed onto the central airhole of the Rebuildable Clapton Atomizer deck. It is designed for throat hit vape by reducing the airflow.
- Installing the pre-wrapped coil. Place the coil (it can be Clapton coil or others) between the screws and wrap the ends around them and tighten up. Attention: The coil has to be wrapped with one end at the plus terminal, with the other end at the minus terminal.
- Positioning and cutting the exceeding ends of wire off. Make sure the coil is fixed in the center and lined up with the air hole, and also make sure the coil is NOT touching the base. Then cut the exceeding ends of wire off.
- Cutting a strip of cotton and make sure it&rsquos not too much and not too less.
- Inserting the cotton, and placing it in the middle.
- Cutting the cotton at an angle and make sure it&rsquos not too short and not too long.
- Wet the coil with your e-liquid and adjust the cotton.
Warning: Coils must be checked for resistance before they are fired on a device, and re-checked periodically to ensure the resistance remains the same.